Description
MATTE FINISH ADDITIVE
Matte-50 is an easy to use, liquid matting agent for use in solvent-based acrylic sealers. Matte-50 gives you the unique ability to instantly create a matte or satin finish sealer at any time. Since the majority of acrylic sealants on the market are only produced in a gloss finish, this is a huge advantage.
Matte-50 has ZERO VOC's and meets all applicable EPA Voc Regulations throughout the United States. Matte-50 is packaged in pint bottles.
Essentials
- Easy to Use
- Matte or Satin Finish
- For Solvent-Based Sealers
- Excellent Suspension
- Usage: Up to 8 oz / Gallon
- Second Coat Only
Warning: This product can expose you to chemicals including Cumene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Mixing Instructions
Add desired amount of Matte-50 to solvent based acrylic sealer and stir with a drill mixer for approximately 2-3 minutes or until homogeneous, prior to application. Stir lightly periodically during application to ensure an even gloss level. Failure to do so may result in a streaked finish with varying gloss levels. Remix any material left over with a drill mixer before applying. Matte-50 is a flammable liquid. An approved respirator, safety goggles, and gloves are recommended.
Follow application instructions for chosen solvent based sealer. Matte-50 should be added to second coat only. Apply first coat of sealer to properly prepared concrete without Matte-50.
Recommended Addition Levels:
Satin Finish - Add 1 pint per 5 gallons of acrylic sealer (3.2 oz / gallon)
Matte Finish - Add 2 pints per 5 gallons of acrylic sealer (6.4 oz / gallon)
Before application, always test product in an inconspicuous area to ensure appearance and compatibility are acceptable.
Got Questions?
Check out the "Help Center", send us an email or just give us a call and we'll be glad to help you with your order!
