LIQUID STAMP RELEASE
Liquid Release is a bubble gum scented, liquid release and finishing aid for stamping, stenciling and texturing freshly poured concrete. It creates a bond-breaker between stamps, skins, stencils and texturing tools for a crisp pattern and clean release. Liquid Release also forms a lubricating barrier between finishing tools and the wet concrete, reducing friction and extending tool life.
Liquid Release has a low viscosity, sprays easily and leaves no residue. Perfect for both interior and exterior projects.
- Easy to Use
- Leaves No Residue
- Interior or Exterior Use
- Bubble Gum Scented
- Coverage - 150-200 sq. ft. / gallon
Trowel and finish freshly placed concrete surfaces to prepare for stamping or stenciling process. At the time when texturing is desired, Liquid Release should be applied between the texturing tools and the freshly placed concrete surface.
Coverage Rate: 150-200 sq. ft. / gallon
Coverage rates may vary depending upon surface porosity, texture, and application method.
Apply liberally using a solvent resistant pump-up sprayer in a mist fashion to the texturing tools to be used and the concrete surface, but only on the area where the next few texture mats or stencil will go. It is recommended to apply only over an area of about 10-20 square feet at a time to avoid evaporation of the release agent. This is especially important on windy days. Continue this process until the texturing application is complete. Never trowel the release agent into the freshly placed concrete surface.
Wash the release agent off the texturing tools simply by spraying them with water.
FOR PERSONAL PROTECTION USE GLOVES, GOGGLES, AND RESPIRATORS.
PLEASE NOTE: It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrate) for desired results prior to application. Coverage rates may vary for all liquids/coatings and substrates depending on porosity, density, texture etc. If applying by spray method, extended coverage rates may be achieved.
Check out the "Help Center", send us an email or just give us a call and we'll be glad to help you with your order!