Diamabrush 100 grit Concrete Prep Tool

Price: $364.94 - $630.46
Product Rating
Malish Diamabrush concrete prep tool
Diamabrush 100 Grit Prep Tool



The original Concrete Prep Tool is a flexible, 100 grit diamond grinding tool for use on smooth concrete floors. This tool easily profiles and prepares concrete floors for the application of stains, dyes, sealers, paints and other coatings. The original prep tool features flexible angled metal blades that are great for lightweight machines and for un-even floors. The 100 grit diamonds leave a beautiful, swirl-free finish, perfect for staining and sealing. This is our favorite Diamabrush tool for producing a final finish for staining. Usually the more aggressive, faster cutting and longer lasting 25 or 100 grit Prep Plus Tools are used first to do the bulk of the work, before this tool is brought in to produce the final profile. This tool is also typically used in the polishing process, before progressing through the successive grits of polymer tools.

Typical blade life of the original Concrete Prep Tool averages between 10,000 - 15,000 sq. ft. Wet-grinding is always recommended if possible, as water will keep the diamonds cooler and substantially increase their life. The original Concrete Prep Tool is available in 12"-20" sizes.

The Diamabrush system by Malish is an extremely affordable and effective way to prepare and profile concrete floors for the application of dye, stain, sealer and epoxy. These tools are easy to use, require no special training and fit most all standard floor machines available at most rental stores.

To ensure the tool you order is a perfect fit for your specific machine and set-up, we custom build each tool per order. This allows us to ship most Diamabrush orders NEXT DAY, and of course shipping is always free to all 48 Continental United States!


Above are two excellent videos explaining how the prep tools work and how to use them most effectively. The first one is actually a training video made specifically for associates in the Home Depot rental department. The tool shown in the HD video is actually the Prep-Plus Tool, not the original Prep Tool, but operation is basically the same for both.


  • Profiles for Stains & Sealers
  • Flexible 100 grit Blades
  • Beautiful Smooth Finish
  • Available in 12"-20" Sizes
  • Clockwise or Counter-clockwise
  • Custom Fit to Your Machine


Don't forget the Clutch Plate required to mount your new brush to your specific machine!

Not sure which plate you need? See "Selecting The Right Tool" below, for more on how to select the right tool and accessories for your specific machine, or Just give us a call with the make and model of your machine, and we'll be glad to help!




Selecting The Right Tool


When ordering your new Concrete Prep Tool you will need to know several things about the machine you will be using the tool on.


1. What is the make and model number of the machine the tool will be used on?

Once you have this information, open the Machine Reference Guide above. The machine manufacturers are listed in alphabetical order. Once your brand of machine is found, continue down until you find the correct model. By reading across, you can then determine the correct clutch plate required for your specific machine. Clutch plates are sold separately, so don't forget to add the one you need before checking out. Disregard the "brush sizes" and "pad driver sizes listed in the reference guide, they are for other applications. If possible, please include your machine make and model in the "Machine / Tool Notes" section of the order form. This is not required, but it is very helpful to our technicians when assembling your new tool.

2. What diameter tool do you need?

For most Diamabrush applications, the tool block diameter should be ordered 2" smaller than the stated machine size if you wish for the tool to fit up inside the housing of the machine. If you wish for your new tool to extend all the way to the edge of your machine housing, you will need a riser to allow the desired diameter tool to drop below the housing and extend outwards toward or past the edge of the machine housing. A riser is a just a simple spacer that is mounted between the clutch plate and tool. You will have the option of including a riser when you select your required clutch plate.

Either way is acceptable and there are pros and cons to each. A tool that fits up inside the machine housing, without a riser allows for a much lower center of gravity and also makes the tool much less vulnerable to damage. On the other hand, a riser allows for a larger tool that will cover more area and allows you to grind all the way up against walls and other stationary objects. We personally always recommend ordering your tool 2 inches smaller than the stated size of your machine and installing it without a riser, but the choice is up to you to decide which setup is best for your application. If you do choose to use a riser and order a larger tool, be very careful not to allow the diamond blades to impact stationary objects.

Diamabrush Components Diamabrush Tool Dimensions

3. What is the rotation of your machine?

The Concrete Prep Tool is available in both clockwise and counter-clockwise rotations. Machine rotation is easily determined by looking straight down at the machine as it sits on the floor, and simply noting the direction of rotation. The majority of machines on the market today have a counter-clockwise rotation. If the Machine Reference Guide specifies the standard NP-9200 clutch plate for your machine, then it is a counter-clockwise rotation. If the Machine Reference Guide specifies a different clutch plate for your machine, you will need to determine the direction of rotation.

4. What center hole diameter is required?

Diamabrush Tools are available with a variety of different diameter center holes, as well as with no hole at all. Once again, the specifications for center hole sizes can be found in the Machine Reference Guide. The majority of machines on the market today require a standard 5" diameter center hole for mounting of the standard NP-9200 clutch plate. If you need a different, or specific size center hole, or desire a solid tool with no center hole, be sure to include that information in the "Machine / Tool Notes" section of the order form.


Not sure which tool you need?
Just give us a call with the make and model of your machine, and we'll be glad to help!

Need Work Done?
Use Our Certified Contractor Locator!

  • State By State Listing!
  • Local Professional Contractors!
  • Cleaning / Pressure Washing / Prep!
  • Staining / Sealing / Epoxy Coating!
Local Contractors
Are You A Professional Contractor?
We want you on our team!

  • Access Contractor Level Pricing!
  • Quantity Discounts!
  • Earn Reward Credits!
  • Get Job Leads!
Contractor Pricing
Overall Product Rating

Diamabrush Prep Tool Reviews

Diamabrush Tools are Awesome!
This tool leaves a beautiful finish for staining.

Just FYI...

  • Always use with water if possible to extend tool life.
  • Not as aggressive as the Prep-Plus Tool.



Customer Reviews

No reviews yet for this product.


Be the first to review the Diamabrush 100 Grit Prep Tool and share your experience with others!



Diamabrush Tool Selection Chart

» Continue Shopping

Recommended Tools & Accessories:

Malish Clutch Plates and Risers
Price: $9.88 - $61.62
Diamabrush 25 grit Concrete Prep Tool
Price: $364.94 - $630.46
Baker's Gray Away Fence Stain Seal n Lock Paver SealerSurfKoat Concrete Products Trident and Surebond Sealers Front 9 Restoration Cleaners Malish Diamabrush System Chapin Sprayers and Parts Swissmex Sprayers