FAST CURE EPOXY ADDITIVE
Epoxy Accelerator is a special additive used to speed up the cure time of 250 HP Epoxy and Maxx Flow 250 HP Epoxy. Perfect for colder temperatures and time sensitive multiple coat applications.
USING ACCELERATOR EFFECTIVELY CUTS ALL TIMING IN HALF INCLUDING POT LIFE, WORKING TIME, DRY TIMES, RECOAT TIMES, ETC.
- Adds to 250 HP Epoxy
- Accelerates Cure Time
- Pre-Measured per 3 gallons of Epoxy
Pour the entire contents of the container into one gallon of Part B 250 HP Cyclo Epoxy or Maxx Flow 100% Solids Epoxy and mix thoroughly for 2-3 minutes with slow speed mixing equipment such as a jiffy mixer. Once the material is thoroughly mixed and homogenous, add two gallons of Part A and mix again for 2-3 minutes or until blended thoroughly. Avoid creating a vortex in the material which could introduce air and/or moisture content to the mixture. Do not mix more than can be applied within the usable pot life time frame.
See Epoxy Tech Data Sheet for complete preparation, mixing and application instructions for chosen 250 HP Epoxy.
Check out the "Help Center", send us an email or just give us a call and we'll be glad to help you with your order!