SurfKoat Cherry Floor Wax (Gloss or Matte Finish)

FLOOR WAX & POLISH

SurfKoat's Cherry Wax is a 21% solids, cherry scented, premium acrylic floor wax. It is perfect for small areas as well as large commercial spaces. Cherry Wax is water-based and applies easily with a

Microfiber Dust Mop

16" Microfiber Mop

More Info

Add to Your List

, synthetic fiber wax applicator or lambs wool applicator.

Cherry Wax provides excellent scuff and abrasion resistance for all types of interior flooring applications including stained concrete floors and epoxy floors. It’s superior resistance to traffic, yields a smooth polished look for months without maintenance. Cherry Wax is available in both a gloss and matte finish to fit any style.

Applying a couple coats of Matte Cherry Wax is a great way to easily reduce the gloss and shine of an existing high-gloss floor, without all the cost and trouble of re-coating!

Essentials

• Non-Flammable
• Easy to Apply
• Gloss or Matte Finish
• Smells Great!
• Reduces Scuffs & Scratches
• Coverage: 500-1000 sq. ft. /gallon

Gloss Tech Data Sheet

Gloss Safety Data Sheet

Matte Tech Data Sheet

Matte Safety Data Sheet

Application Instructions

Mix solution well before using.

Surface should be clean and dry before application.

Mask off all adjacent surfaces with painter's tape or plastic duct tape. If spray buffing, use coated cardboard as a spray shield.

Hand Application:

1. Do not apply by pouring directly onto surface. Use a plastic tray or roller pan. Apply by

Microfiber Dust Mop

16" Microfiber Mop

More Info

Add to Your List

, synthetic wax applicator or lambs wool applicator.

2. Apply at a rate of 1000 square feet per gallon in very thin coats only. Apply in one direction to a consistent, even, and uniform finish. If puddling or pinholes appear, work them out into a thin coat.

3. Allow to dry 1-3 hours. Repeat process as many times as necessary to achieve required finish.

Buffer Application:

If spray buffing, dilute gloss wax 1:2 with water. Apply using a

Trigger Mist Sprayer

Chapin Trigger Mister
32oz Hand Held Spray Bottle

More Info

Add to Your List

over a small area at a time. Buff that area with a 300-500 RPM buffer in a side to side motion until the liquid has disappeared and a superior shine is left. Continue this same process throughout the whole floor. Spray buffing is not recommended with matte finish wax as it may result in inconsistent sheen.

Got Questions?

Check out the "Help Center", send us an email or just give us a call and we'll be glad to help you with your order!